2020 Mercedes Benz Sprinter 3500 Suspension Lift Kit Parts
Choose your Drive Type for your 2020 Mercedes-Benz Sprinter 3500
Image
Product
Price
- 1.5 in. Lift; w/Bilstein B4; For PN[K9000/K9000DL/K9003/K9003DL/K9007/K9007DL/K9010/K9010DL] Use 275/75R16 Tire w/16x8 Wheel w/6 in. BS w/Minor Trimming~Use 275/75R16 Front Tire w/16X5.5 Wheel w/8 in. BS w/Minor Trimming~Use 275/75R16 Rear Tire w/16X5.5 Wheel w/-2.16 in. BS
- Coil Assist Kit; 1.5 in. Lift; w/Bilstein B4; For PN[K9000/K9000DL/K9003/K9003DL/K9007/K9007DL/K9010/K9010DL];
- Coil Assist Kit
- Product Attributes:
- Lift/Drop Height: 1.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- The High-Quality Cold-Wound Coil Springs For Longevity And Ride Quality
- Billet Aluminum Upper And Lower Coils Seats Properly Locate The Coil Springs
- Increases Ride Height For More Ground Clearance And Helps Reduce Body Sway
- Can Be Paired With Fabtech Auxiliary Shock Mounts And Dirt Logic 2.25 Shocks For A Complete Upgrade
- Retains Factory Travel And Alignment
- The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicles suspension Fabtech recommends their Auxiliary Front Shock Mounts with Dirt Logic 2.25 shocks for a complete upgrade. This combination will help improve the ride characteristics of the vehicle well beyond stock. It will provide a very compliant highway ride while improving performance for off-highway use.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Mercedes-Benz Sprinter 3500 | Front | 4WD |
- 1.5 in. Lift; w/o Struts/Shocks; For PN[K9002/K9009] Use 275/75R16 Tire w/16x8 Wheel w/6 in. BS w/Minor Trimming~Use 275/75R16 Front Tire w/16X5.5 Wheel w/8 in. BS w/Minor Trimming~Use 275/75R16 Rear Tire w/16X5.5 Wheel w/-2.16 in. BS
- Coil Assist Kit; 1.5 in. Lift; w/o Struts/Shocks; For PN[K9002/K9009];
- Coil Assist Kit
- Product Attributes:
- Lift/Drop Height: 1.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- The High-Quality Cold-Wound Coil Springs For Longevity And Ride Quality
- Billet Aluminum Upper And Lower Coils Seats Properly Locate The Coil Springs
- Increases Ride Height For More Ground Clearance And Helps Reduce Body Sway
- Can Be Paired With Fabtech Auxiliary Shock Mounts And Dirt Logic 2.25 Shocks For A Complete Upgrade
- Retains Factory Travel And Alignment
- The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicles suspension Fabtech recommends their Auxiliary Front Shock Mounts with Dirt Logic 2.25 shocks for a complete upgrade. This combination will help improve the ride characteristics of the vehicle well beyond stock. It will provide a very compliant highway ride while improving performance for off-highway use.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Mercedes-Benz Sprinter 3500 | Front | 4WD |
- 1.5 in.; Front Bilstein B4 Struts & Rear Performance Shocks Use 275/75R16 Front Tire w/16X5.5 Wheel w/8 in. BS w/Minor Trimming~Use 275/75R16 Rear Tire w/16X5.5 Wheel w/-2.16 in. BS
- Coil Assist Kit; 1.5 in.; Front Bilstein B4 Struts & Rear Performance Shocks;
- Coil Assist Kit
- Product Attributes:
- Lift/Drop Height: 1.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- The High-Quality Cold-Wound Coil Springs For Longevity And Ride Quality
- Billet Aluminum Upper And Lower Coils Seats Properly Locate The Coil Springs
- Increases Ride Height For More Ground Clearance And Helps Reduce Body Sway
- Can Be Paired With Fabtech Auxiliary Shock Mounts And Dirt Logic 2.25 Shocks For A Complete Upgrade
- Retains Factory Travel And Alignment
- The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicle's suspension Fabtech recommends their Auxiliary Front Shock Mounts with Dirt Logic 2.25 shocks for a complete upgrade. This combination will help improve the ride characteristics of the vehicle well beyond stock. It will provide a very compliant highway ride while improving performance for off-highway use.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Mercedes-Benz Sprinter 3500 | Front | 4WD |
- 1.5 in.; Front Bilstein B4 Struts And Rear Dirt Logic 2.25 Shocks Use 275/75R16 Front Tire w/16X5.5 Wheel w/8 in. BS w/Minor Trimming~Use 275/75R16 Rear Tire w/16X5.5 Wheel w/-2.16 in. BS
- Coil Assist Kit; 1.5 in.; Front Bilstein B4 Struts And Rear Dirt Logic 2.25 Shocks;
- Coil Assist Kit
- Product Attributes:
- Lift/Drop Height: 1.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- The High-Quality Cold-Wound Coil Springs For Longevity And Ride Quality
- Billet Aluminum Upper And Lower Coils Seats Properly Locate The Coil Springs
- Increases Ride Height For More Ground Clearance And Helps Reduce Body Sway
- Can Be Paired With Fabtech Auxiliary Shock Mounts And Dirt Logic 2.25 Shocks For A Complete Upgrade
- Retains Factory Travel And Alignment
- The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicle's suspension Fabtech recommends their Auxiliary Front Shock Mounts with Dirt Logic 2.25 shocks for a complete upgrade. This combination will help improve the ride characteristics of the vehicle well beyond stock. It will provide a very compliant highway ride while improving performance for off-highway use.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Mercedes-Benz Sprinter 3500 | Front | 4WD |
- 1.5 in.; Front Bilstein B4 Struts w/Performance Auxiliary Shocks And Rear Performance Shocks Use 275/75R16 Front Tire w/16X5.5 Wheel w/8 in. BS w/Minor Trimming~Use 275/75R16 Rear Tire w/16X5.5 Wheel w/-2.16 in. BS
- Coil Assist Kit; 1.5 in.; Front Bilstein B4 Struts w/Performance Auxiliary Shocks And Rear Performance Shocks;
- Coil Assist Kit
- Product Attributes:
- Lift/Drop Height: 1.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- The High-Quality Cold-Wound Coil Springs For Longevity And Ride Quality
- Billet Aluminum Upper And Lower Coils Seats Properly Locate The Coil Springs
- Increases Ride Height For More Ground Clearance And Helps Reduce Body Sway
- Additional Shock Damping For Upfitted Vans And/Or Hauling Heavy Cargo
- Brackets Attach To Subframe For A Quiet Ride
- No Interior Removal Required For Installation
- Retains Factory Travel And Alignment
- The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicle's suspension Fabtech has also developed an Auxiliary Front Shock kit for a complete upgrade. These heavy-duty front auxiliary shock mounts are built with 1/4 in. thick steel and attach to the suspension subframe only. There is no attachment to the unibody structure. This type of mounting is vastly superior to other shock kits that mount to the unibody. By mounting to the subframe it helps isolate road noise and eliminates potential stress to the unibody. With only two holes to drill for installation it takes about 1-2 hours with no removal of the interior required. This Sprinter auxiliary shock kit with the Performance twin tube shocks is a great upgrade for Sprinter owners looking for increased suspension damping for highway and offroad trails.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Mercedes-Benz Sprinter 3500 | Front | 4WD |
- 1.5 in.; No Shocks Use 275/75R16 Front Tire w/16X5.5 Wheel w/8 in. BS w/Minor Trimming~Use 275/75R16 Rear Tire w/16X5.5 Wheel w/-2.16 in. BS
- Coil Assist Kit; 1.5 in.; No Shocks;
- Coil Assist Kit
- Product Attributes:
- Lift/Drop Height: 1.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- The High-Quality Cold-Wound Coil Springs For Longevity And Ride Quality
- Billet Aluminum Upper And Lower Coils Seats Properly Locate The Coil Springs
- Increases Ride Height For More Ground Clearance And Helps Reduce Body Sway
- Can Be Paired With Fabtech Auxiliary Shock Mounts And Dirt Logic 2.25 Shocks For A Complete Upgrade
- Retains Factory Travel And Alignment
- The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicle's suspension Fabtech recommends their Auxiliary Front Shock Mounts with Dirt Logic 2.25 shocks for a complete upgrade. This combination will help improve the ride characteristics of the vehicle well beyond stock. It will provide a very compliant highway ride while improving performance for off-highway use.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Mercedes-Benz Sprinter 3500 | Front | 4WD |
- 1.5 in; Front Bilstein B4 Struts w/Dirt Logic 2.25 Resi Auxiliary Shocks And Rear Dirt Logic 2.25 Shocks Use 275/75R16 Front Tire w/16X5.5 Wheel w/8 in. BS w/Minor Trimming~Use 275/75R16 Rear Tire w/16X5.5 Wheel w/-2.16 in. BS
- Coil Assist Kit; 1.5 in; Front Bilstein B4 Struts w/Dirt Logic 2.25 Resi Auxiliary Shocks And Rear Dirt Logic 2.25 Shocks;
- Coil Assist Kit
- Product Attributes:
- Lift/Drop Height: 1.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- The High-Quality Cold-Wound Coil Springs For Longevity And Ride Quality
- Billet Aluminum Upper And Lower Coils Seats Properly Locate The Coil Springs
- Increases Ride Height For More Ground Clearance And Helps Reduce Body Sway
- Additional Shock Damping For Upfitted Vans And/Or Hauling Heavy Cargo
- Brackets Attach To Subframe For A Quiet Ride
- No Interior Removal Required For Installation
- Retains Factory Travel And Alignment
- The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicle's suspension Fabtech has also developed an Auxiliary Front Shock kit for a complete upgrade. The kit adds two high-quality Fabtech built Dirt Logic 2.25 shocks with valving specific to the Sprinter van. The valving will provide a superior ride quality for both loaded and unloaded vans. The Dirt Logic 2.25 shocks are constructed with a stainless steel bodies that provide maximum corrosion resistance in all conditions. These heavy-duty auxiliary shock mounts are built with 1/4 in. thick steel and attach to the suspension subframe only. There is no attachment to the unibody structure. This type of mounting is vastly superior to other shock kits that mount to the unibody. By mounting to the subframe this helps isolate road noise and eliminates potential stress to the unibody. With only two holes to drill for installation, it takes about 1-2 hours with no removal of the interior required.This Sprinter van coil assist kit and auxiliary shocks are the perfect upgrade for Sprinter owners looking for increased suspension damping for highway and offroad trails.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Mercedes-Benz Sprinter 3500 | Front | 4WD |
- Rear Kit; 1.5 in. Lift; For PN[K9007/K9007DL/K9008DL/K9009/K9010/K9010DL/K9011DL] Use 275/75R16 Front Tire w/16X5.5 Wheel w/8 in. BS w/Minor Trimming~Use 275/75R16 Rear Tire w/16X5.5 Wheel w/-2.16 in. BS
- Component Box; Rear Kit; 1.5 in. Lift; For PN[K9007/K9007DL/K9008DL/K9009/K9010/K9010DL/K9011DL];
- Component Box
- Product Attributes:
- Lift/Drop Height: 1.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Component box for a specific part number. Contains necessary parts for your lift kit needs.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2020 - Mercedes-Benz Sprinter 3500 | 4WD |
- 1.5 in. Lift; w/Bilstein B6; For PN[K9001DL/K9004DL/K9008DL/K9011DL] Use 275/75R16 Tire w/16x8 Wheel w/6 in. BS w/Minor Trimming~Use 275/75R16 Front Tire w/16X5.5 Wheel w/8 in. BS w/Minor Trimming~Use 275/75R16 Rear Tire w/16X5.5 Wheel w/-2.16 in. BS
- Coil Assist Kit; 1.5 in. Lift; w/Bilstein B6; For PN[K9001DL/K9004DL/K9008DL/K9011DL];
- Coil Assist Kit
- Product Attributes:
- Lift/Drop Height: 1.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- The High-Quality Cold-Wound Coil Springs For Longevity And Ride Quality
- Billet Aluminum Upper And Lower Coils Seats Properly Locate The Coil Springs
- Increases Ride Height For More Ground Clearance And Helps Reduce Body Sway
- Can Be Paired With Fabtech Auxiliary Shock Mounts And Dirt Logic 2.25 Shocks For A Complete Upgrade
- Retains Factory Travel And Alignment
- The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicles suspension Fabtech recommends their Auxiliary Front Shock Mounts with Dirt Logic 2.25 shocks for a complete upgrade. This combination will help improve the ride characteristics of the vehicle well beyond stock. It will provide a very compliant highway ride while improving performance for off-highway use.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Mercedes-Benz Sprinter 3500 | Front | 4WD |
- 1.5 in.; Front Bilstein B6 Struts And Rear Dirt Logic 2.25 Shocks Use 275/75R16 Front Tire w/16X5.5 Wheel w/8 in. BS w/Minor Trimming~Use 275/75R16 Rear Tire w/16X5.5 Wheel w/-2.16 in. BS
- Coil Assist Kit; 1.5 in.; Front Bilstein B6 Struts And Rear Dirt Logic 2.25 Shocks;
- Coil Assist Kit
- Product Attributes:
- Lift/Drop Height: 1.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- The High-Quality Cold-Wound Coil Springs For Longevity And Ride Quality
- Billet Aluminum Upper And Lower Coils Seats Properly Locate The Coil Springs
- Increases Ride Height For More Ground Clearance And Helps Reduce Body Sway
- Can Be Paired With Fabtech Auxiliary Shock Mounts And Dirt Logic 2.25 Shocks For A Complete Upgrade
- Retains Factory Travel And Alignment
- The front suspension of a Sprinter van utilizes a MacPherson strut to provide damping. The stock struts leave a lot to be desired on their own once you upfit the van for overland use or haul cargo. Fabtech offers a solution to this problem by utilizing a Bilstein strut with their high-quality cold wound coil spring. The coil springs are positioned around the strut bodies. They provide an additional lift to the vehicle of 1 in.-1.5 in. over stock. This creates increased ground clearance and clearance of larger tires for off-road use. Additionally, they help reduce sway for vans with full interior build-outs or hauling heavy cargo. The coil springs utilize billet aluminum upper and lower coils seats that slide over the strut. They are positioned to the correct ride height and create a secure mounting for the springs. To further enhance the vehicle's suspension Fabtech recommends their Auxiliary Front Shock Mounts with Dirt Logic 2.25 shocks for a complete upgrade. This combination will help improve the ride characteristics of the vehicle well beyond stock. It will provide a very compliant highway ride while improving performance for off-highway use.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Mercedes-Benz Sprinter 3500 | Front | 4WD |
Showing 1 - 10 of 11 products
Loading...